• Parking Gate 2000 operates 14’ through 20’ gate arms
• Weatherproof and corrosion-resistant all steel cabinet
• 1/2 HP instant reversing motor
• Weatherproof and corrosion-resistant all steel cabinet
• Polished stainless steel mounting base
• NoTouch© proximity sensor prevents gate from striking pedestrians and vehicles
• Remotely programmable microprocessor controller (via RS-232/485 port)
• Multiple operation modes
• Barrier Gate operation counter built into software
• Resettable thermal overload motor protection
• Thermostatically controlled cabinet heater

Parking Gate 2000 Parking/Access Control  Gate

• Cabinet:
  14” x 15” x 40” 12 gauge steel with a 13” x 14” x 6.25” polished stainless steel base
• Door:
  Flush mounted with chrome lock assembly and a single internal gasket
• Paint:
  Textured powder coat with silicone base. Yellow or white are the standard colors. Additional color options are available.
• Motor:
  1/2 HP, single phase, instant reversing, 115/220V AC, 50/60 Hz
• Limit Switch:
  Controls gate travel so no brake device is required
• Heater:
  500 W thermostat controlled strip device
• Drive:
  Heavy duty, high cycle speed reducer with 60:1 output to the main shaft raises or lowers gate arm in five seconds.
• Shear/Spring Pin:
  Connection from main gate shaft to gate arm bracket shears off to prevent damage to internal mechanism in case of sudden gate stoppage.

CG2100-1  Gate Controller

• Controller:
  Self-contained universal gate control device. Lane mode selection via RS-232 port on main CPU from laptop or desktop computer. 8 opto-isolated inputs, 4 opto-isolated outputs, 5 – 30V DC range wet or dry. 
• Environment:
  -15°~149° F (-26°~65° C) with heater
• Input Power:
  115V AC, 50/60 Hz 220V AC optional feature
• Output Signal:
  12V DC, 1.5 Amps and 5V DC, 1 Amp
• Convenience Outlet:
  110V AC, 60 Hz, 15 Amps
• Service Switches:
  Three position switch to raise gate, lower gate, and normal operation mode, Power On/Off switch, Heater/Fan control switch
• Microprocessor:
  20 MHz PIC processor
• Vehicle Detection:
  PC board with one 11 pin amphenol connector for single or dual channel detectors